mine hoist used for cement and mine equipment

Technical performance

Multi rope friction hoist motor as power source, through reducer, such as leading wheel gear transmission system and working system, using the friction force F, realize the hoist vessel in the shaft hoist. The brake system composed of disc brake and hydraulic oil is adopted to control the deceleration and parking of the hoist. The speed of the hoist is controlled by measuring the speed of the generator and centrifugal speed limiter. The position of hoist in wellbore is reflected by the configuration of encoder, analog columnar display and digital display. Through a series of electrical, mechanical, hydraulic control, protection system to ensure the safe operation of the machine.

FRICITION WELL TOWER HOIST

ITEM	NO	FRICITION WHEEL DIAMETER	WIRE ROPE ROOT NUMBER	MAXIMUM DIAMETER OF WIRE ROPE	MAXIMUM DIAMETER OF WIRE ROPE	MAXIMUM DIAMETER OF WIRE ROPE	WORE ROPE SPACING	MAX HOIST SPEED	REDUCER		GUIDE WHEEL DIAMETER	MACHINE SHIFT WEIGHT(EXCLUDING MOTOR)	WHEEL SHIFT WEIGHT	MACHINE WEIGHT(EXCLUDING ELECTRICAL EQUIPMENT)	SIZE
		M	M	KN	KN	MM	MM	M/S	MODEL	RATIO	M	KG	KG	KG	M
1	JKM-2.25x4 (1)	2.25	4	80	230	24	200	10	Xp800		2.25	6500	2100	33847	7.4X8X23
2	JKAA-2.8x4 (1)	2.80	4	140	340	28	250	15	XpWM	7.35 10.5	2.8	9820	2480	45300	8.5X10X2.65
3	JKM-2.8x6 (1)	2.80	6	180	510	28	250	15	XpIQO		2.8	12700	3840	69000	8x8.5X2.68
4	JKM-3.25x4(1)	3.25	4	180	520	36	300	15	Xp1l20	11.5	3.25	12700	3840	72000	8.9x8.9X2.98
5	JKM-3.5x4 (1)	3.5	4	220	590	38	300	15	xpn»		3.5	13500	4060	75000	9X9X3.2
6	JKM-3x4 (III)	3	4	140	450	32	300	15			3	8940	3060	45000	7X8.7X2.68
7	JKM-3.25x4 (III)	3.25	4	112	480	32	300	15			3.25	10940	3060	48000	7.2X8.9X2.98
8	JKM-3.5x4 (III)	3.50	4	220	525	35	300	15			3.5	13500	4060	56507	7.3X9X3.2
9	JKAA-3.5x6 (III)	3.50	6	220	820	35	WO	15			3.5	18500	4760	74000	8X9X3.2
10	JKM-4x4 (III)	4	4	250	750	40	300	15			4	16300	4080	74200	7.5X9X3.63
11	JKM-4x6 (III)	4	6	250	750	40	300	15			4	18500	6020	99500	9X 9X3.63
12	JKM-4.5x4 (III)	4.5	A	250	900	48	300	15			4.5	27800	8950	99100	9X9.5X3.63
13	JKM-4.5X6 (III)	4.5	6	340	1350	48	300	15			4.5	35000	11300	133000	12X9.5X3.9

FRICTION FLOOR ELEVATOR

ITEM	MODEL	DIAMETER	THE NUMBER OF STEEL WIRE	MAXIMUM DIAMETER OF WIRE ROPE	MAXIMUM DIAMETER OF WIRE ROPE	MAXIMUM DIAMETER OF WIRE ROPE	WORE ROPE SPACING	MAX HOIST SPEED	REDUCER		GUIDE WHEEL DIAMETER	MACHINE SHIFT WEIGHT(EXCLUDING MOTOR)	HEAD WHEEL SHIFT WEIGHT	MACHINE WEIGHT(EXCLUDING ELECTRICAL EQUIPMENT)	SIZE
		M	M	KN	KN	MM	MM	M/S	MODEL	SEED RATIO	M	KG	KG	KG	M
1	JKMD-2.25x4 (1)	2.25	4	65	215	22	250	10	XpSOO		2.25	6500	2300X2	46350	68X9.5X2.3
2	JKMD-2.8x4 (1)	2.80	4	95	335	28	300	15	XplOOO		2.8	11000	4100X2	63000	8.5x10X2.67
3	JKAAD-3.25X4 (1)	3.25	4	180	520	36	300	15	Xpll20	7.35	2.8	12700	4060X2	98008	8.9X9.5X3
4	JKAAD-3.5X4 (1)	3.5	4	140	525	38	300	15	Xp1120	10.5 11.5	3.5	17600	5500X2	101410	8.9X9.5X3
5	JKAAD-3x4 (III)	3	4	140 •	450	32	300	16			3	11500	4540X2	74500	7x8.7x2.68
6	JKAAO-3.25X4 (III)	3.25	4	140	450	36	300	16			3.25	10940	5500X2	82192	7.2x8.9x2.98
7	JKMD-3.5X4 (III)	3.50	4	220	590	38	300	16			3.5	10940	5500X2	84500	7.35X9.5X3
8	JKMD-4x4 (III)	4	4	270	800	44	350	16			4	24400	7800X2	12500	81x8.7X3.4
9	JKMD-4.5X4 (III)	4.5	4	340	980	50	350	16			4.5	27800	8950	99100	9x9.5x3.63
10	JKMD-5x4 (III)	5	4	340	1200	54	350	16			5	36500	11300X2	191500	9.5x10X4

Scope of application

This series of products used in coal, metal and non metal mines shaft lift coal, minerals,lifting, lowering material and equipment etc..

Technical characteristics

1, according to the performance parameters, can be single or double configuration of brake disc brake disc friction wheel, floor type friction hoist the friction pad for the double rope groove, and is equipped with a rope device, the well tower for single rope groove.
In 2, no oil, water or using special oil condition, friction pad can be used Nissan GM-^3 or import GDM 326 high performance material, the friction coefficient was >0.25.
3, the sheave and guide wheel device, the eccentric arrangement, with high polymer wear-resisting material liner on the rim. Reduce the wear of wire rope.
4, the brake oil cylinder rear wheel, electric, hydraulic control, hydraulic station is divided into two types of medium and high-pressure. Constant braking moment electric delay and delay two class brake hydraulic pressure hydraulic station in two ways; in the high-pressure hydraulic station constant speed and constant braking moment two class brake two forms, can be equipped with pressure relays, pressure sensor and pressure transmitter;
5 speed transmission, and backup protection, supporting the provision of brake disc deflection monitoring device, monitoring device, wire rope sliding slot car device, special tool etc.;
6, there are four kinds of control options, all adopt the integrated signal lamp, two for the table, a novel integrated operating handle, wherein a built-in LCD computer; two are split console, equipped with digital depth indicator. Have industrial TV or computer, printer and other special table;
7, equipped with a mine hoist the network control and remote diagnosis system.

8, using eight 5^ 3 new environmental asbestos free brake shoe, its superior performance, ensure the safety of the disc brake.

Scope of supply

The host, head sheave device. The operation platform, depth indicator, hydraulic and lubricating station, different type: electric drive and control system, information transmission system; the user requirements, also can produce various specifications of products to meet the needs of the user.

Workshop show

Factory equipments

Luoyang Hong Xin Heavy Co., LTD. is located in Luoyang Xin'an Industrial Park, Luoyang Hongxin Heavy Machinery Co., Ltd is an enterprise featured with industrial designing, processing and manufacturing, which is qualified for import-export trade. Covering an area of 15,000 square meters and holding an annual production value of 80 million RMB, the company of 20 million RMB registered capital has total 100 staff members, among which there are 20 engineering technicians owning senior and medium professional titles and 40 intermediate and senior technicians capable of product designing and developing.

Hongxin is dedicated to produce reducers, hoists, crushers, ball grinding mills and the equipments of screening, coal washing, metallurgy and cement, and replacement parts. Meanwhile, we provide the perform maintenance service for various series of equipments. There are 52 large-scale equipments applied into the manufacturing process, such as T200 CNC floor boring and milling machine, YK 73125 CNC molding gear grinding machine, YK322B CNC molding gear grinding machine, Y3200 gear hobbing machine, Y1600 CNC gear sharper, 4m vertical lathe, 6.3m CNC vertical lathe, T110 CNC boring machine, and 52 middle-sized productive and assistive equipments, which integrate strong manufacturing and processing capability with complete managing system of production and technology, quality management system and comprehensive testing measures

certificates

Contact us if you need more details on Mine Winding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Headframe Friction Hoist、Brake Disc Friction Wheel. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Hoisting Equipments > Multi-rope Friction Mine Hoist