Model No.: WP30-XRP37
Our Passenger Elevators help passengers reach their floors quickly, comfortably, and safely. For tenants, they provide quiet operation, which is especially important at night. For architects, they are easy to integrate into designs and help optimize available building space. For building owners, they help reduce total lifetime costs by providing excellent maintainability and reduced energy consumption.
Spacious elevator cars enable passengers and their luggage, or staff and their equipment, to travel comfortably and efficiently through the buildings.
|Persons||Load (kg)||Speed (m/s)||Car dimension (mm)||Door opening size(mm)||Hoist-way size (mm)||Machine room size(mm)||Overhead height (mm)||Pit depth (mm)|
|Inner size A x B||Net Door-opening||Width x Depth||Width x Depth|
|Photocell protection||In the door open and shut period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects.|
|Designated stop||If the elevator can not open the door in the destination floor out of some reason, the elevator will close the door and travel to the next designated floor.|
|Overload holding stop||When the car is overload, the buzzer rings and stops the elevator in the same floor.|
Anti-stall timer protection
|The elevator stops operation due to slippery traction wire rope.|
|Start protection control||If the elevator does not leave door zone with in the designated time after it gets started, it will stop the operation.|
|Inspection operation||When the elevator enters into inspection operation, the car travels at inching running.|
|Fault self-diagnosis||The controller can record 62 latest troubles so as to quickly remove the trouble and restore the elevator operation.|
|Repeated door closing||If the elevator can not close the door due to certain obstacle or interference, the elevator will reopen or re-shut the door until sundries are eliminated.|
|Up/down over-run and final limit protection||The device can effectively prevent the elevator from surging to the top or knocking the bottom when it is out of control. It results in more safe and reliable elevator travel.|
Down over-speed protection device
When the elevator downs 1.3 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running. Safety tongs act to force the elevator stop in order to ensure the safety.
|Upward over-speed protection device||When the elevator up speed is 1.3 times higher than rated speed, the device will automatically decelerate or brake the elevator.|
|Micro-touch button for car call and hall call||Novel micro-touch button is used for operation panel command button in the car and landing calling button.|
|Floor and direction indicator inside car||The car shows the elevator floor location and current travel direction.|
|Floor and direction indicator in hall||The landing shows the elevator floor location and current travel direction.|
Emergency car lighting
|Emergency car lighting automatically activated once power failure.|
|When the elevator enters into emergency electric operation, the car travels at low speed inching running.|
Five way intercom
|Communication amid car, car top, Elevator Machine room, well pit and rescue duty room through interphone.|
|In emergency conditions, if bell button above car operation panel is continuously pressed, electric bell on top of the car will ring .|
Fire emergency return
|If you start key switch in main landing or monitor screen, all the callings will be canceled. The elevator directly and immediately drive to the designated rescue floor and automatically open the door.|
Energy saving function
|Car ventilation, automatic lighting switch||If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save energy.|
|Remote shut-off||The elevator can be called to main landing(after finishing the service) through the key switch and automatically exists the service.|
Q1. What's the necessary information should be provided before purchasing an elevator?
1).How many people loading? (6persons means 450kg, 8persons means 630kg, 10persons means 800kg,13persons means 1000kg etc.)
2).How many floors does the elevator travel?
3).What's the shaft size? Shaft width and shaft depth?
4).Is there a machine room on top of the shaft?
When we get the answers, we can design exact elevator and make an quotation to you.
Q2. What advantages your elevators have?
We use the best parts for our elevators, gearless motor from xizi Otis, door operator from Shenling or Wittur, control system from Monarch or STEP etc. All these parts from the biggest and the best suppliers in the world. Actually, elevator is an assembled product, like iphone. And we control the design, control system, and the parts quality and delivery. Our strict management make sure the elevator can be installed without any problem and all parts will be fixed in the correct position, our design make sure the elevator can run stably and efficiently.
Q3. What about your price level?
Our price is in the middle level in market. We are not OTIS, not KONE, not Mitsubishi, so our price is much lower than theirs, however, we want to make good enough elevator and Escalator, so we use the best parts from the best suppliers to guarantee the quality, that means our cost is not low, so we can't give price so low as the other elevator suppliers. You can find out lower price than ours in the market. So all of our clients are middle level people or companies, they like lower price but not dreed, they require good quality and not limit.
Q4. How to do the elevator installation and maintenance?
Normally, local people can do that job with our provided manuals and technology support. You can ask the local professional elevator engineers or technician to install elevators for you, that's the long time solution. You can also ask our engineers to go to your site to do that job but the cost will be much higher and maintenance job will be still given to local people for the rest time after installation. Remember that installation is the most important. Even if the elevator quality is good enough, but the installation is bad, then the elevator will run with many problems.
Q5. How to do for passengers when elevator power is off suddenly?
In case of power failure, elevator stops. The passengers can press the Alarm bell button inside cabin. And the maintenance people should come, make the elevator stop in level and open the door. Of course, you can also buy an ARD or UPS device with the elevator, then it can make the elevator stop in level and open the door automatically. It can save time and reduce the fear for the passengers inside the elevator. Contact us if you need more details on Passenger Elevator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Passenger Lift、Commercial Passenger Elevator. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Passenger Elevator/Lift